D Machine And Setting Data - Siemens Sinumerik 802D sl Programming Manual

Machine and Setting Data
D.1 Machine/Setting Data
10604
MD number
Default setting: 0
Changes effective after Power On
Data type: BYTE
Meaning:
This MD cannot SINUMERIK 802D sl.
10615
MD number
Default setting: 0
Changes effective after Power On
Data type: DWORD
Meaning:
This MD cannot SINUMERIK 802D sl.
© SIEMENS AG 2007 All rights reserved
SINUMERIK 802D sl/840D sl840D/840Di sl/840Di/810D ISO Turning - - 04.07 Edition
WALIM_GEOAX_CHANGE_MODE
Work area limitation when switching geometrical axes
Minimum input limit: 0
Protection level: 2/7
Retain or deactivate work area limitation when switching geometrical axes.
The MD is bit- -coded and has the following meaning:
Bit = =0: Deactivate work area limitation when switching geometrical axes
=1: Retain work area limitation when switching geometrical axes
NCFRAME_POWERON_MASK
Delete global base frames on Power On
Minimum input limit: 0
Protection level: 2/7
This machine data defines whether global base frames are deleted on a Power On reset.
The selection can be made separately for the individual base frames.
Bit 0 corresponds to base frame 0, bit 1 to base frame 1, etc.
0: Base frame is retained on Power On
1: Base frame is deleted on Power On.
Maximum input limit: 1
Unit: - -
Applies with effect from SW version: 6.2
Maximum input limit: 0
Unit: - -
Applies with effect from SW version: 5.2
D
D-199