Importing User Alarms; Overview - Siemens SINUMERIK 840D sl Configuration Manual

Importing user alarms

8.1

Overview

The procedure overview below describes how to copy the SINUMERIK user alarm files
directly from a PCU 50.5 or NCU and import them into TIA Portal.
Alternatively, the import of alarm files in CSV format is also supported. This can, for
example, be created if you manage your language-dependent text files with SINUMERIK
Integrate Access My Machine /P2P.
Requirement
● The user alarms are available in SINUMERIK Operate (or AMM).
● A SINUMERIK NCU or device proxy (PLC 300) is inserted in the TIA Portal project.
Procedure overview
To use SINUMERIK user alarms in the TIA Portal, proceed as follows:
Step Description
1 Make the user alarm files available in the required languages. The following options are available:
You can copy the files via the SINUMERIK Operate user interface, for example to a USB flash drive
•
(Page 154).
You can copy the files with Windows Explorer from the following directory that is created during the installation
•
of SINUMERIK Operate:
C:\Program Files (x86)\Siemens\MotionControl\oem\Sinumerik\hmi\lng
2 Check whether all languages or language variants in which you want to import SINUMERIK user alarms are ena-
bled as project languages in the TIA Portal.
To check which exported alarm files correspond to which project languages in the TIA Portal, refer to Section
•
Language assignment in language-dependent texts (Page 155).
How to activate the project languages is described in Section Enable project languages (Page 157).
•
3 Import the SINUMERIK user alarms into the TIA Portal (Page 158).
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
8
153