Equipping Multitool With Tools - Siemens SINUMERIK Series Operating Manual

Tool management
13.16 Working with Multitool
Note
The tool creation sequence can be defined differently.
13.16.3

Equipping multitool with tools

Precondition
A multitool has been created in the tool list.
Procedure
Equipping the multitool with a new tool
Loading the multitool
Loading the tool into the multitool
740
The multitool is created in the tool list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. The tool list is opened.
2. Select the required multitool, position the cursor on an empty mul‐
titool location.
3. Press the "New tool" softkey.
4. Using the appropriate selection list, e.g. favorites, select the re‐
quired tool.
2. Select the required multitool, position the cursor on an empty mul‐
titool location.
3. Press the "Load" softkey.
The "Load with..." window opens.
4. Select the required tool.
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling