Program Block; Displaying And Editing The Program Block - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Program block

You can create and edit program blocks and display further information as follows:

● Local variables

You can display local variables of a block.

● Create new program block

You can create a new program block.

● Open program block

You can display all the logic and graphical information of the program block and you can

edit the block.

● Properties

You can display the properties of a block and edit them, when required.

● Protection

You can protect the block with a password. Then, the block cannot be opened without

entering the password.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

The program block view is open.

Press the "Zoom +" softkey to enlarge the section of the ladder diagram.

After enlarging, the "Zoom -" softkey is available.

Press the "Zoom -" softkey to reduce the section of the ladder diagram

Machine manufacturer

Please observe the information provided by the machine manufacturer.

Select the "Startup" operating area.

Press the "PLC" softkey.

Edit PLC user program (828D only)

23.5 View of the program blocks