Loading And Integrating A Configuration (Pc Systems); Overview - Siemens sinumerik 840d sl Configuration Manual

Loading and integrating a configuration (PC systems)

11.1

Overview

Introduction
Once you have set the configuration and compiled it, you need to transfer it to the PCU 50.5
and integrate it in SINUMERIK Operate.
Requirement
● The screen resolution is set (Page 51).
● If the header of SINUMERIK Operate is to be displayed at runtime, the screen size is
configured (Page 53).
● The current status of the configuration is completely compiled.
See: Information system, keyword "Project, compile".
● PCU 50.5 and PG/PC are available in the network.
You can find information about the network configuration of the PCU 50.5 Windows 7 in
the Basesoftware and HMI Software commissioning manual under PCU Basesoftware
Windows 7 (IM10).
Procedure overview
Step Description
1 Once you have set the configuration and compiled it, you need to transfer it to the PCU 50.5.
Information system, keyword "Project, compile"
•
Information system, keyword "Loading projects"
•
2 Integrate the runtime in SINUMERIK Operate (Page 145).
See also
Configuring the PG/PC interface (PC systems) (Page 28)
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014
11
143