Displaying And Editing Base Zero Offset - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Setting up the machine

4.8 Zero offsets

Displaying and editing base zero offset

The defined channel-specific and global base offsets, divided into coarse and fine offsets, are

displayed for all set-up axes in the "Zero offset - Base" window.

Activate base offsets

The offsets specified here are immediately active.

Select the "Parameter" operating area.

Press the "Work offset" and "Overview" softkeys.

The "Work Offsets - Overview" window opens.

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Select the "Parameter" operating area.

Press the "Zero offset" softkey.

Press the "Base" softkey.

The "Zero Offset - Base" window is opened.

You can edit the values directly in the table.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0