Fault Message On Pc - Siemens SINUMERIK 840D sl Function Manual

03/2013

3.4.18 Fault message on PC

Function description
The user records a fault message at the PC, and saves the control monitor.
Fig. 3-47: Fault message on PC
The fault is reported at "Report fault".
Fig. 3-48: Report fault
Function
Error report
Requester
Phone
The fault is reported at the PC after the fault message has been saved. The
message is displayed in the control monitor / event list.
Fig. 3-49: Report fault
Function
Date
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Description
Describes the type of the fault
Name of the machine operator
Telephone number
Description
Opens the reported fault.
The fault message automatically creates the date.
Date display: DD.MM.YYYY and time hours,
minutes, seconds.
Indicates the status of the job. The display is
automatically selected by the system, depending on
the acknowledgment made by the user.
Only one state can apply at any one time.
The job is open.
The job is closed and OK.
The job is closed and not OK.
The job is open and has not yet been started. This is
only possible with the interval counter and with time-
controlled jobs.
A white icon indicates a job that is not yet due.
3 Setting up functions
3.4 Fault services
Type
INPUT
INPUT
INPUT
Type
DISPLAY
DISPLAY
DISPLAY
3-163