Creating A Selection File - Siemens SINUMERIK 840D sl Commissioning Manual

See also
1. Documenting startup (Page 337)
2. Defining start-up (Page 337)
Making a logbook entry (Page 338)
18.6.2

Creating a selection file

Using the selection files, you can prepare the machine information and address information
and transfer it into the controller. This means that it does not have to be manually entered.
Selection files
You can store the following selection files in the controller:
● "dealer.xml" for dealer data
● "ma_types.xml" for machine types
● "oem.xml" for manufacturer data
● "oemsubs.xml" for manufacturer data of a regional office
● "user.xml" for end user data
Templates
Templates for selection files are available under the directory
/HMI-data/templates/examples/machine identity.
In future, EUNA data will also be available, which you can store in the controller. This
therefore ensures that the address information is clear.
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Press the "End user" softkey if you want to acquire and store user-
specific data.
5. Enter the address data in the following text fields.
- OR -
If selection files exist, all unique information will automatically be set to
valid for the system when you press the "OK" softkey. The entries are
stored in the operating software.
Service and diagnostics
18.6 Machine identity
329