T,F,S Window - Siemens SINUMERIK 840D sl Operating Manual

Display
Repos offset
Footer
See also
Overview (Page 76)
Work offsets (Page 109)
1.4.4

T,F,S window

The most important data concerning the current tool, the feedrate (path feed or axis feed in
JOG) and the spindle are displayed in the T, F, and S windows.
Tool data
Display
T
Tool name
Location
D
H
Ø
R
Z
X
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Meaning
The distances traversed in manual mode are displayed.
This information is only displayed when you are in the "Repos"
submode.
Display of active work offsets and transformations.
The T, F, S values are also displayed in the full-screen version.
Meaning
Name of current tool
Location number of current tool
Cutting edge of the current tool
The tool is displayed with the associated tool type symbol corresponding to
the actual coordinate system in the selected cutting edge position.
If the tool is swiveled, then this is taken into account in the display of the
cutting edge position.
In DIN-ISO mode the H number is displayed instead of the cutting edge
number.
H number (tool offset data record for DIN-ISO mode)
If there is a valid D number, this is also displayed.
Diameter of current tool
Radius of the actual tool
Z value of the actual tool
X value of the actual tool
Introduction
1.4 User interface
39