Programming the PLC
3.10 Exporting PLC symbols for SINUMERIK Operate
Result
The PLC symbols will be copied to the chosen storage location. The "PlcSym.snh" file is
created. Depending on your settings, the files are also created with German or English
comments: "PlcSym_GR.snt" and "PlcSym_UK.snt".
Note
Notation
The notation (upper and lower case) of the file names created by the program is mandatory
and must not be changed.
3.10.3
Importing PLC symbols
Requirement
● The symbol export files are available on the NCU or PCU, e.g. using a USB FlashDrive
Note
Notation
The notation (upper and lower case) of the file names created by the program is
mandatory and must not be changed.
● The current PLC symbols in SINUMERIK Operate have been saved
Note
Saving or deleting old symbol tables
Note that already existing files are overwritten during the export if you confirm that this
should be done. Furthermore, it can lead to inconsistencies if not all files are exported.
We recommend that the old files are backed up or deleted before a new export, or the
files are exported to an empty directory.
76
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017