6. The selected files are then copied to the project. If a file already exists, a confirmation
prompt is displayed.
7. The new files are then displayed in the project dialog.
6.2.9
Deleting a file
You can delete the selected files from the project with this function.
Operating sequence
1. Open a project.
Figure 6-23
AMM with project dialog (OFFLINE)
2. From the tabs in the project dialog, select the file type (alarm texts, EasyScreen, tool
management texts, archives) from which you want to delete a file.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Operator control (software)
6.2 Project
105