Changing The Section - Siemens SINUMERIK 840D sl Operating Manual

Procedure
6.11.2.4

Changing the section

If you want to move or change the size of a section of the drawing, for example, to view details
or redisplay the complete drawing later, use the magnifying glass.
You can use the magnifying glass to determine the section and then change its size.
Requirement
The DXF file is opened in the Program Manager or in the editor.
Procedure
Turning
Operating Manual, 05/2017, A5E40868721
1. Press the "Details" and "Zoom +" softkeys if you wish to enlarge the size
of the segment.
- OR -
2. Press the "Details" and "Zoom -" softkeys if you wish to reduce the size of
the segment.
- OR -
3. Press the "Details" and "Auto zoom" softkeys if you wish to automatically
adapt the segment to the size of the window.
- OR -
4. Press the "Details" and "Zoom elem. selection" softkeys if you want to
automatically zoom elements that are in a selection set.
1. Press the "Details" and "Magnifying glass" softkeys.
A magnifying glass in the shape of a rectangular frame appears.
2. Press the <+> key to enlarge the frame.
- OR -
Press the <-> key to reduce the frame.
- OR -
Machining the workpiece
6.11 Working with DXF files
155