Configuring Profisafe - Siemens SINUMERIK 840D sl Commissioning Manual

PLC commissioning
5.3 Extending the SIMATIC S7 project (PROFINET)
4. Confirm with "OK".
5. The following message is output regarding isochronous mode, which you must confirm with
"Yes":
5.3.4

Configuring PROFIsafe

Requirement
In order to configure PROFIsafe, it is necessary that the "S7 configurations pack" option is
installed.
80
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA