Setting up the machine
2.5 Work offsets
2.5.3
Displaying and editing base zero offset
The defined channel-specific and global base offsets, divided into coarse and fine offsets,
are displayed for all set-up axes in the "Work offset - Base" window.
The rotation, scaling and mirroring are displayed if they are set.
Proceed as follows
Note
Activate base offsets
The offsets specified here are immediately active.
42
1.
Select the "Parameter" operating area.
2.
Press the "Work offset" softkey.
3.
Press the "Base" softkey.
The "Zero offset - Base" window is opened.
4.
You can edit the values directly in the table.
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal