Editing The User View - Siemens SINUMERIK 840D sl Commissioning Manual

Machine and setting data
9.9 User views
Selecting a particular machine data item
9.9.2

Editing the user view

Depending on the row you have selected, you can use the "Properties" softkey to change
comments and, in the case of machine data, the data source (channel, axis, drive unit).
● Machine data
● Comment texts
58
8. Press the "Back" softkey to close the listbox and return to the user
view you want to edit.
Your entries are automatically stored.
9. Press the "Insert Text..." softkey to insert any text in the open user
view.
The "Insert Text" input window opens.
10. Enter a text and explanatory description for the text and press the
"Insert Before Line" or "Insert After Line" sotkey to apply the text.
11. Press the "Back" softkey to save your entries and return to the user
view you are editing.
You can use the Search dialog box to look for a particular data item.
Depending on the data type you can select either a fixed or a variable data source for
machine data.
The entry "variable(*)" means that when you can select another data source (channel,
axis, drive unit) with vertical softkeys 1- 3 (+, - and direct selection) the value displayed
changes to refer to the data source currently selected.
Alternately, you can select a fixed data source so that the displayed value does not
change when you select a different data source.
Text and description
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)