Reactivating A Tool - Siemens SINUMERIK 840D sl Operating Manual

Tool management
13.6 Tool wear
Icon/
Marking
Gray double arrow
(configurable)
Red "X"
Procedure
See also
Displaying tool details (Page 660)
Changing a tool type (Page 664)
13.6.1

Reactivating a tool

You can replace disabled tools or make them ready for use again.
Preconditions
In order to reactivate a tool, the monitoring function must be activated and a setpoint must be
stored.
Procedure
Reactivating and positioning
When the "Reactivate with positioning" function is configured, the selected tool's magazine
location will also be positioned at a loading point. You can exchange the tool.
654
1. Select the "Parameter" operating area.
2. Press the "Tool wear" softkey.
1. The tool wear list is opened.
2. Position the cursor on the disabled tool which you would like to reuse.
3. Press the "Reactivate" softkey.
The value entered as the setpoint is entered as the new tool life or work‐
piece count.
The disabling of the tool is canceled.
Meaning
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 05/2017, A5E40868956
Milling