You must have installed the "TeleService" software and the license on the PC.
Note
The "SINUMERIK Integrate Access MyMachine /P2P (PC)" (6FC5800-0AP30-0YB0) option
is required for remote access via TeleService Adapter.
Note
The software is usually installed at C:\Program Files\Siemens\TeleService
The license is on the supplied USB flash drive.
In the first step, insert the plant (e.g. "840D sl") into the "TeleService" software.
Principle operating sequence
Parameter assignment involves the following steps:
1. Insert the plant.
2. Assign parameters for the TS Adapter.
3. Administrate the TS Adapter.
4. Assign parameters for the internal modem of the TS Adapter.
5. Test the connection.
5.5.3.2
Inserting the system
Operating sequence
1. Start the "TeleService" Software.
2. Close all internal windows and select "Phone book" > "New".
3. Call it "newphonebook.tel".
4. Press <F3>.
A new folder is created.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Connection to the control
5.5 Establishing a modem connection
39