Setting up the machine
2.5 Measuring the tool
2.5.2
Measuring the tool length with the workpiece as reference point
Procedure
Note
Tool measurement is only possible with an active tool.
70
1.
Insert the tool you want to measure in the spindle.
2.
Select "JOG" mode in the "Machine" operating area.
3.
Press the "Meas. tool" and "Length manual" softkeys.
The "Length Manual" window opens.
4.
Select the cutting edge number D and the number of the replacement
tool ST of the tool.
5.
Approach the workpiece in the Z direction, scratch it with a turning
spindle and enter the set position Z0 of the workpiece edge.
6.
Press the "Set length" softkey.
The tool length is calculated automatically and entered in the tool list.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling