Three Straight Lines (Ang1, X3 - Siemens SINUMERIK 840Di sl Programming Manual

Hide thumbs Also See for SINUMERIK 840Di sl:
Table of Contents

Advertisement

Parameters
ANG1=
ANG2=
CHR
X1, Z1=
X2, Z2=
X3=, Z3=
Machine manufacturer
The names for angle (ANG), radius (RND) and chamfer (CHR) can be set in MD, see
/FBFA/FB ISO Dialects.
Example
N10 X10 Z80 F1000 G18
N20 ANG1=148.65 CHR=5.5
N30 X85 Z40 ANG2=100
N40 ...
4.14.3
Three straight lines (ANG1, X3... Z3... ANG2, X4... Z4...)
Function
The intersection of the straight lines can be designed as a corner, a curve, or a chamfer. The
end point of the third straight line must always be programmed as Cartesian.
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Angle of the first straight line
Angle of the second straight line
Chamfer
Start coordinates
Intersection of the two straight lines
End point of the second straight line
;Approach start position
;Straight line with specified angle and chamfer
;Straight line with specified angle and end point
Motion commands
4.14 Contour definitions
161

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents