Exporting The Drive-Cliq Topology; Requirement - Siemens SINUMERIK 840D sl Operating Manual

Configuring with EPLAN Add-In

5.5 Exporting the DRIVE-CLiQ topology

Filtering of drive objects
To filter according to drive objects, you have the following options:
● Filtering via the specified DO name
● Via the entered DO type
● Via the entered DO number
● Via the entered name of the axis
● Via the entered comment on the drive object
Figure 5-17
5.5 Exporting the DRIVE-CLiQ topology
5.5.1

Requirement

The equipment parts list forms the basis for export with the following requirements:
● Select precisely one function as main function for each item designation.
● Store at least one article for each main function.
● Define a DRIVE-CLiQ type.
Device connection name
The connection name is determined according to the following algorithm:
● Connector item designation property
● From the item designation of the connection function: The last section after the device item
designation is relevant; identified by the ":" or "-" separator.
Examples
=Plant+location item desig‐
nation:X100
=Plant+location item desig‐
nation-X1
=Plant+location item desig‐
nation DQ:X100
The device connection name for the export of the DRIVE-CLiQ topology is defined by the
SINAMICS product catalog or through the definition of an unknown device.
You can find further information about this in Section "Defining unknown devices" (Page 19).
32
Filtering drive objects
→ X100
→ X1
→ X100
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA