Equability Test - Siemens SINUMERIK 840D sl Function Manual

3 Setting up functions
3.2 Configuring measurements and measurement series

3.2.1 Equability test

Parameter description
Parameters for conducting an equability test:
Function
Name
Channel
Axis
Start point
End point
Feedrate
Fig. 3-10: Equability test on the operator panel
3-104
Description
Name of the measurement series
(measurements do not have a name).
Selection of the required channel. The channel
defines the possible machine axes in the "Axis"
selection list.
Selection from the possible machine axes that
can be programmed in the selected channel.
The axis position at which the first partial
movement of the measurement begins.
The axis position at which the first partial
movement of the measurement ends.
Speed per minute at which the axis is moved.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2013 All Rights Reserved
03/2013
Type
INPUT
SELECTION
SELECTION
INPUT
INPUT
INPUT