File Properties; Showing Properties - Siemens SINUMERIK 840D sl Operating Manual

Overview of the program data

2.7 File properties

Example
Type
M
M
M
M
M
E
Type M indicates that the activity was manually executed with the NC data.
Type E indicates that the activity was automatically executed with the NC data.
Overview of the program data
2.7 File properties
2.7.1

Showing properties

Use
You can display additional information for a program data file selected from the list. In
addition to the standard details, such as the name and type, all management data, such as
creator, creation date and the date of the last change can be displayed.
With the exception of setting and resetting the trial cut and release ID, the data cannot be
changed.
Note
You can individually configure the sequence and selection of the columns to be displayed on
the DNC server.
Features
Features
Name
Type
Version
Workpiece
Release ID
Trial cut ID
22
Date
17.09.2010 14:49:54
16.09.2010 13:39:45
16.09.2010 13:38:53
15.09.2010 08:19:47
14.09.2010 15:56:59
14.09.2010 15:56:58
Meaning
Name of folders, NC programs, workpieces, NC packages
File/program type
Version identifier
Workpiece
Released NC program with version number
To run-in an NC program with version number that has been released
Number Message text
0 KHBTEST.MPF downloaded
0 MYTEST043.MPF downloaded
0 FACE_MILLING_3.MPF downloaded
0 HGFGH.SPF uploaded
0 test.MPF uploaded
0 Invalid uploadtarget-NodeID: 7 changed to: 4
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0
MCIS DNC - Direct Numerical Control