Operating area switchover
Channel switchover
Cancelling alarms
Calling up the online help
2.4.11
Changing the user interface language
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
You can display the operating area menu by touching the display symbol
for the active operating area in the status display.
You can switch over to the next channel by touching the channel display
in the status display.
Touch operation of the Alarm Cancel icon will cancel the displayed alarm.
Touch operation of the information icon in the status display will open the
online help.
1.
Select the "Start-up" operating area.
2.
Press the "Change language" softkey.
The "Language selection" window opens. The language set last is selec‐
ted.
3.
Position the cursor on the desired language.
4.
Press the "OK" softkey.
- OR -
Press the <INPUT> key.
The user interface changes to the selected language.
Introduction
2.4 Operator interface
45