Dnc Ifc Serial - Siemens Sinumerik 840D sl Function Manual

05.07

1.2.7 DNC IFC Serial

With DNC IFC Serial, you can connect CNC machines via a serial interface to
DNC Cell or DNC Plant or to the station PC.
Note
DNC IFC Serial is required for each serial CNC machine.
1.2.8 DNC IFC Dialog (dialog function)
DNC IFC Serial can be expanded with DNC IFC Dialog.
It enables the operator input for the download or upload of machining programs
directly on the CNC.
Dialog programs for requests (created via an editor) and responses are exchanged
between DNC and the machine server. These contain the data relevant for the
download or upload.
Note
DNC IFC Dialog is optional for each serial CNC machine.
1.2.9 DNC IFC file system
DNC IFC file system can be used to connect any CNC machine tools that can be
supplied with NC data by means of an NFS (with additional software, e.g. Microsoft
SFU), SMB or CIFS file system via an Ethernet network.
Programs are transferred via the DNC or HMI computer, or via a station PC.
In addition, a SINUMERIK with PCU20, for example, can be integrated via the DNC
IFC file system.
1.2.10 DNC Machine
DNC Machine is a basic Ethernet solution for networking SINUMERIK* controllers.
DNC Machine provides a user interface on the SINUMERIK controller via which
NC programs can be transferred between the file system and SINUMERIK
controller without the need for additional software components.
Note
DNC Machine can be used independently of MCIS DNC Plant or Cell.
SINUMERIK*:
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
SINUMERIK 810D
SINUMERIK 840D
SINUMERIK 840Di
PCU50 under Windows with SINUMERIK 840D sl
DNC Plant/DNC Cell (FBDN1)
1 Introduction
FBDN1/1-19
