Handwheel; Handwheel Assignment - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine

2.7 Handwheel

2.7 Handwheel
2.7.1

Handwheel assignment

You can traverse the axes in the machine coordinate system (MCS) or in the workpiece
coordinate system (WCS) via the handwheel.
All axes are provided in the following order for handwheel assignment:
• Geometry axes
• Channel machine axes
Proceed as follows
50
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1. Select the "Machine" operating area.
Press the "JOG", "AUTO", or "MDA" key.
...
2. Press the menu forward key and the "Handwheel" softkey.
The "Handwheel" window appears.
...
A field for axis assignment will be offered for every connected
handwheel.
3. Place the cursor in the field next to the handwheel with which you wish
to assign the axis (e.g. no. 1).
4. Press the corresponding softkey to select the desired axis (e.g. "X").
- OR
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal