Deleting A Zero Offset; Measuring The Workpiece Zero - Siemens SINUMERIK 828D Operating Manual

3.8.6

Deleting a zero offset

You have the option of deleting work offsets. This resets the entered values.
Procedure
...
3.8.7

Measuring the workpiece zero

Procedure
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1. Select the "Parameter" operating area.
2. Press the "Work offset" softkey.
3. Press the "Overview", "Basis" or "G54...G599" softkey.
4. Press the "Details" softkey.
5. Position the cursor on the work offset you would like to delete.
6. Press the "Clear offset" softkey.
A confirmation prompt is displayed as to whether you really want to
delete the work offset.
7. Press the "OK" softkey to confirm that you wish to delete the work off-
set.
1. Select the "Parameters" operating area and press the "Zero offset" soft-
key.
2. Press the "G54...G599" softkey and select the zero offset in which the
zero point is to be saved.
3. Press the "Workpiece zero" softkey.
Setting up the machine
3.8 Zero offsets
97