Mounting - Siemens MCP 398C Manual

Mounting

5.2 Mounting
Parasitic voltage
If the device is installed in an environment with higher / more hazardous voltages with
insufficient insulation, parasitic voltages can lead to death, serious injury and property
damage.
To prevent parasitic voltages, insulate the cables corresponding to the highest voltage that
will be dealt with.
The safety of a system with an integrated MCP with operator panel front is the responsibility
of the person setting up the system.
Observe all relevant information from this manual regarding the mounting of the chosen
operator panel front.
The mounting at the installation site is performed in accordance with the instructions of the
chosen operator panel front.
5.2 Mounting
The MCP 398C machine control panel can be combined with the TOP XX00 operator panel
fronts as well as with the expansion modules.
Figure 5-1 Recommended combination sequence
34
WARNING
Machine control panel: MCP 398C
Manual, 12/2017, A5E43199783B AA