Multitouch Operation With Sinumerik Operate; Overview - Siemens SINUMERIK 840D sl System Manual

Multitouch operation with SINUMERIK Operate

3.1

Overview

Widescreen-format multitouch panels are optimized for multitouch operation, e.g. the OP 015
black, on which SINUMERIK Operate is active with the "SINUMERIK Operate Generation 2"
user interface.
Multitouch panel
Figure 3-1
With this user interface, multitouch can be used for all operator actions. Using multitouch
makes operation based on SINUMERIK Operate a lot faster.
References
Further information on the subject of "user interface" is available in the following literature:
● SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
support.industry.siemens.com/cs/document/109752360)
● SINUMERIK Integrate Run MyScreens (BE2) / SINUMERIK 840D sl Programming Manual
(https://support.industry.siemens.com/cs/document/109752511)
● SINUMERIK 840D sl Easy XML / SINUMERIK 840D sl Programming Manual
support.industry.siemens.com/cs/document/109752366)
Smart machine tool operation
System Manual, 12/2017, 6FC5397-7FP40-0BA0
Machine manufacturer
Activate user interface "SINUMERIK Operate Generation 2" using machine data
MD9112 $MM_HMI_SKIN.
OP 015 black multitouch panel with "SINUMERIK Operate Generation 2" user interface
3
(https://
(https://
11