Assigning A Name For Magazine Location Types - Siemens SINUMERIK 840D sl Commissioning Manual

Tool management
12.2 Configuring the user interface
Example
Magazine 1 should have the name "main magazine".
$TC_MAP2[1]="main magazine"
If the "main magazine" text is to be output language-dependent, then the language-
dependent texts for the text identifier "main magazine" must be created.
See also
Please refer to the following section for the procedure to create language-dependent text:
Creating OEM texts (Page 182)
12.2.12

Assigning a name for magazine location types

<PLACETYPECONFIGURATION> tag
You can find entries to allocate your own location type identifiers in the tag
<PLACETYPECONFIGURATION>. Magazines and magazine location types can be
displayed with texts in the tool lists. Instead of identifier 2, e.g. for location type 2, the
configured text is then output in the tool lists.
Entries
PLACETYPEXXX
Text
Tooltip
Example
<PLACETYPECONFIGURATION>
</PLACETYPECONFIGURATION>
170
Meaning
XXX stands for the number of the location type
Text identifier of the location type
Tooltip text identifier of the location type
<PLACETYPE1>
<Text value="TM_PLACETYPE_1" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_1" type="QString" />
</PLACETYPE1>
<PLACETYPE2>
<Text value="TM_PLACETYPE_2" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_2" type="QString" />
</PLACETYPE2>
<PLACETYPE3>
<Text value="TM_PLACETYPE_3" type="QString" />
<Tooltip value="TM_TT_PLACETYPE_3" type="QString" />
</PLACETYPE3>
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)