Editing Block Properties Subsequently; Editing A Program Block; Editing The Plc User Program - Siemens SINUMERIK Series Operating Manual

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

Setting protection

Editing block properties subsequently

You can edit the title, author and comments of a block.

To insert a line break in comment, use the key combination <ALT> + <INPUT>.

Block names, subprogram names and data class assignments cannot be edited.

You can change and extend PLC user programs.

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Enter the password.

● "This program block remains protected" is activated:

You have the option of editing or deleting the block. Protection is

reactivated when you load the PLC user program to the PLC.

● "This program block remains protected" is deactivated:

Block protection is permanently withdrawn. After being loaded to the

PLC, the PLC user program is not protected.

Enter the required password in the first line "Please enter password" and

re-enter the password in the second line.

Activate the "Protect all program blocks using this password" checkbox,

if you wish to protect all of the user program blocks.

Program blocks that are already password-protected are not affected.

Press the "Accept" softkey.

The relevant block is selected and the "Program Block" window is open.

Press the "Properties" softkey.

The "Properties" window appears.

Edit PLC user program (828D only)

23.5 View of the program blocks