Service and diagnostics
18.6 Machine identity
18.6.1
Entering machine-specific information
Preconditions
You must have the following access rights to be able to enter or change machine-specific
information.
Procedure
328
Access level 1 (manufacturer)
Access level 2 (service)
Access level 3 (user)
1.
Select the "Diagnostics" operating area.
2.
Press the "Version" softkey.
It takes some time to call the version display. While the version data is
being determined a progress message box and the appropriate text are
displayed in the dialog line.
3.
Press the "Logbook" and "Change" softkeys.
The "IdentSNAPSHOT" window opens.
4.
Press the "Manufacturer" softkey if you want to acquire and store
manufacturer-specific data.
If you press the "Manufacturer" softkey again, it changes to
"Manufacturer branch".
- OR / AND -
Press the "Manufacturer branch" softkey if you want to acquire and
store address data of the manufacturer branch.
Pressing the softkey once again changes it back to "Manufacturer".
- OR / AND -
Press the "Dealer" softkey if you want to acquire and store dealer-
specific data.
- OR / AND -
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)