When you have correctly entered all necessary parameters, you can close the window and
save your settings.
You cannot accept the parameters if they are incomplete or obviously erroneous. In this
case, you can see from the dialog line which parameters are missing or were entered
You can use the calculator to quickly calculate parameter values during programming. If, for
example, the diameter of a workpiece is only dimensioned indirectly in the workpiece
drawing, i.e., the diameter must be derived from the sum of several other dimension
specifications, you can calculate the diameter directly in the input field of this parameter.
The following arithmetic operations are available:
● Calculation with parentheses
● Square root of x
● x squared
You can input a maximum of 256 characters in a field.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
+ <number> Enter "s" or "S" as well as the number x for which you would like to
generate the square.
Close the value entry using the <INPUT> key and the result is
transferred into the field.
Press the "OK" softkey.
- OR -
Press the "Accept" softkey.
1.4 User interface