Assigning Functions To Keys - Siemens SINUMERIK 840D sl Commissioning Manual

08/2005
5.1.2

Assigning functions to keys

When the system is supplied, the assignment of hotkeys to the functions is entered
in file Keys.ini.
Directories
With HMI Advanced, the file can exist in various directories. These are:
• user
• oem
• add_on *)
• mmc0w32
• mmc2 *)
• hmi_adv
The files are executed in the above sequence. Entries in the directory, which
appears at the beginning of the sequence will disable existing entries in directories,
which appear later in the sequence.
*) These directories are reserved for Siemens.
The assignments for HK1 to HK6 are supplied, saved as follows in Keys.ini in
directory mmc2 for the standard system:
Key
HK1 Position
HK2 Program
HK3 Offset
HK4 Prg. manager
HK5 Alarm
HK6 Custom
The assignment for ShopMill/ShopTurn applications is as follows:
Key
HK1 Position
HK2 Program
HK3 Offset
HK4 Prg. manager
HK5 Alarm
HK6 Custom
With HMI Embedded, the data in Keys.ini can be adapted using the Software
Configuration Kit (SCK):
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
*)
*)
Function
Machine operating area, last screen
Program operating area, last screen
Parameters operating area, last screen
Main screen programming
Diagnosis operating area, alarm screen
Default Custom operating area, last screen
(user-configured operator interface)
Function
Machine operating area, last screen
Program editor, last status
Offset area, last status
Program directory last status
Diagnosis operating area, alarm screen
Default Custom operating area, last screen
(user-configured operator interface)
Expanding the Operator Interface (BE1)
5 Configuring OP Hotkeys and PLC Keys
BE1/5-121