Machine Control Panels; Overview; Controls On The Machine Control Panel - Siemens SINUMERIK 840D sl Turning Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Turning:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Introduction
2.3 Machine control panels
2.3
Machine control panels
2.3.1
Overview
The machine tool can be equipped with a machine control panel by Siemens or with a specific
machine control panel from the machine manufacturer.
You use the machine control panel to initiate actions on the machine tool such as traversing an
axis or starting the machining of a workpiece.
2.3.2
Controls on the machine control panel
In this example, the MCP 483C IE machine control panel is used to illustrate the operator
controls and displays of a Siemens machine control panel.
Overview
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
38
EMERGENCY STOP button
Installation locations for control devices (d = 16 mm)
RESET
Program control
Operating modes, machine functions
User keys T1 to T15
Traversing axes with rapid traverse override and coordinate switchover
Spindle control with override switch
Feed control with override switch
Keyswitch (four positions)
Operating Manual, 06/2019, A5E44903486B AB
Turning
Advertisement
Table of Contents
