If a parameter is assigned an illegal value, this is indicated in the input screen and is designated
as follows:
● The entry field has a colored background (background color, pink).
● A note is displayed in the comment line.
● If the parameter input field is selected using the cursor, the note is also displayed as tooltip.
The programming can only be completed after the incorrect value has been corrected.
Incorrect parameter values are also monitored with alarms during the cycle runtime.
9.16.3
Setting data for technological functions
Technological functions can be influenced and corrected using machine or setting data.
For additional information, please refer to the following documentation:
Commissioning Manual SINUMERIK Operate / SINUMERIK 840D sl
9.16.4
Changing a cycle call
You have called the desired cycle via softkey in the program editor, entered the parameters
and confirmed with "Accept".
Procedure
Milling
Operating Manual, 05/2017, A5E40868956
1.
Select the desired cycle call and press the <Cursor right> key.
The associated input screen of the selected cycle call is opened.
- OR -
Press the <SHIFT + INSERT> key combination.
This starts the edit mode for this cycle call and you can edit it like a normal
NC block. This means that it is possible to generate an empty block before
the cycle is called. For instance, to insert something before a cycle that
is located at the beginning of the program.
Note: In edit mode, the cycle call can be changed in such a way that it
can no longer be recompiled in the parameter screen.
You exit the edit mode by pressing the <SHIFT + INSERT> key combi‐
nation.
- OR -
You are in the edit mode and press the <INPUT> key.
A new line is created after the cursor position.
Creating a ShopMill program
9.16 Calling technology functions
301