Displaying And Editing Details Of The Zero Offsets - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
2.5 Work offsets
2.5.5

Displaying and editing details of the zero offsets

For each work offset, you can display and edit all data for all axes. You can also delete work
offsets.
For every axis, values for the following data will be displayed:
● Coarse and fine offsets
● Rotation
● Scaling
● Mirroring
Note
Settings for rotation, scaling and mirroring are specified here and can only be changed here.
Procedure
54
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Work offset" softkey.
3. Press the "Active", "Base" or "G54...G599" softkey.
The corresponding window appears.
...
4. Place the cursor on the desired work offset to view its details.
5. Press the "Details" softkey.
A window opens, depending on the selected work offset, e.g. "Work
Offset - Details: G54 to G599".
6. You can edit the values directly in the table.
- OR -
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal