Setting up the machine
2.7 Manual mode
2.7.3.2
Traversing axes by a variable increment
Proceed as follows
2.7.4
Positioning axes
In manual mode, you can traverse individual or several axes to certain positions in order to
implement simple machining sequences.
The feedrate / rapid traverse override is active during traversing.
Procedure
66
1.
Select the "Machine" operating area.
Press the "JOG" key.
2.
Press the "Settings" softkey.
The "Settings for manual operation" window is opened.
3.
Enter the desired value for the "Variable increment" parameter.
Example Enter 500 for a desired increment of 500 μm (0.5 mm).
4.
Press the "Inc VAR" key.
5.
Select the axis to be traversed.
6.
Press the "+" or "-" key.
...
Each time you press the key the selected axis is traversed by the set
increment.
Feedrate and rapid traverse override switches can be operative.
1.
If required, select a tool.
2.
Select the "JOG" operating mode.
3.
Press the "Positions" softkey.
4.
Specify the desired value for the feedrate F.
- OR -
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal