Suppress Current Block Display (Displof, Displon, Actblocno) - Siemens SINUMERIK 840D sl Programming Manual

Flexible NC programming
1.24 Subprogram technique
Single block suppression for program nesting
If
SBLOF
at the subprogram return jump with
from already running. If
subprogram, single block suppression is activated, execution is only stopped after the next
machine function block of the calling program. If that is not wanted,
programmed in the subprogram before the return (
jump to a higher-level program with
1.24.2.6

Suppress current block display (DISPLOF, DISPLON, ACTBLOCNO)

Function
The current program block is displayed as standard in the block display. The display of the
current block can be suppressed in cycles and subprograms using the
Instead of the current block, the call of the cycle or the subprogram is displayed. The
command can be used to revoke suppression of the block display.
DISPLOF
effective for the entire subprogram and implicitly for all subprograms called from it which do
not contain a
Syntax
PROC ... DISPLOF
PROC ... DISPLOF ACTBLOCNO
PROC ... DISPLON
Meaning
DISPLOF
DISPLON
172
was programmed in the
, without
SBLOF
and are programmed in the program line with the
DISPLON
or
DISPLON DISPLOF
: Command to suppress the current block display.
Location:
Effective:
Note:
If further subprograms are called from the subprogram using the
command, then the current block display is also suppressed in these
subprograms unless
: Command for revoking suppression of the display of the current block
Location:
Effective:
Note:
If further subprograms are called from the subprogram using the
command, then the current block will also be displayed in these
subprograms unless
instruction in a subprogram, then execution is stopped
PROC
. That prevents the next block in the calling program
M17
is programmed in the
SBLOF
). Execution does not stop for a return
M17
.
RET
command. This is true of all ASUBs.
At the end of the program line with the
Up to the return jump from the subprogram or end of
program.
is explicitly programmed in them.
DISPLON
At the end of the program line with the
Up to the return jump from the subprogram or end of
program.
is explicitly programmed in them.
DISPLOF
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
instruction in a
PROC
must be
SBLON
command.
DISPLOF
DISPLON
operation and are
PROC
operation
PROC
DISPLOF
operation
PROC
DISPLON
Job Planning