Data Description; General Machine Data - Siemens Sinumerik 840D sl Programming Manual

Data Description

C.1

General machine data

10604
SD Number
Default setting: 0
Changes effective after POWER ON
Data type: BYTE
Meaning:
MD cannot be changed for SINUMERIK 802D sl.
10615
MD number
Default setting: 0
Changes effective after POWER ON
Data type: DWORD
Meaning:
MD cannot be changed for SINUMERIK 802D sl.
ISO Milling
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
WALIM_GEOAX_CHANGE_MODE
Working area limitation during switchover of geometry axes
min. input limit: 0
The machine data is used to define whether a possibly active working field limitation is
retained or deactivated during a geo axis interchange.
The MD is bit-coded with following significance:
Bit 0=0: Working field limitation is deactivated during geo axis interchange
Bit 0=1: Active working area limitation remains active during geo axis interchange
NCBFRAME_POWERON_MASK
Delete global basic frames during Power On
min. input limit: 0
This machine data is used to define whether global basic frames are deleted during Power
On Reset.
The individual basic frames can be selected separately.
Bit 0 corresponds to basic frame 0, Bit 1 to basic frame 1 etc.
0: Basic frame is retained at Power ON
1: Basic frame is deleted at Power On.
Protection level: 2/7
Valid as of software version: 6.2
Protection level: 2/7
Valid as of software version: 5.2
max. input limit: 1
Unit: -
max. input limit: 0
Unit: -
C
151