Interrupts - Siemens Sinumerik 840D sl Programming Manual

Interrupts

An alarm is created on detecting error states in cycles and the cycle execution is interrupted.
Messages are output from the cycles in the status bar of the control system. These
messages do not interrupt the machining.
The alarms having the numbers 61000 to 62999 are generated in the cycles. This large area
is further subdivided according to alarm responses and cancel criteria.
Table E- 1 Alarm no. and alarm description
Alarm No. brief description
General alarms
61001 Incorrect thread lead
61003 No feedrate programmed in cycle
61004 Configuration of geometry axis is
not correct
61101 Reference plane defined
incorrectly
61102 No spindle direction programmed
61107 First drilling depth defined
incorrectly
61603 Groove shape defined incorrectly
61607 Starting point programmed
incorrectly
61610 No infeed depth programmed
ISO alarms
61800 External CNC system is missing
ISO Milling
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
Cause
CYCLE376T
CYCLE371T, CYCLE374T,
CYCLE383T, CYCLE384T,
CYCLE385T, CYCLE381M,
CYCLE383M, CYCLE384M,
CYCLE387M
CYCLE328
CYCLE375T, CYCLE81,
CYCLE83, CYCLE84, CYCLE87
CYCLE371T, CYCLE374T,
CYCLE383T, CYCLE384T,
CYCLE385T, CYCLE381M,
CYCLE383M, CYCLE384M,
CYCLE387M
CYCLE374T
CYCLE376T
CYCLE374T
CYCLE300, CYCLE328,
CYCLE330, CYCLE371T,
CYCLE374T, CYCLE376T,
CYCLE383T, CYCLE384T,
CYCLE385T, CYCLE381M,
CYCLE383M, CYCLE384M,
CYCLE387M
Explanation/remedy
The thread lead is not specified
correctly
No F word was programmed in
the calling block before the cycle
call, refer to Siemens standard
cycles.
The sequence of the geometry
axes is incorrect, refer to Siemens
standard cycles
Refer to Siemens standard cycles
Spindle direction M03 or M04 is
missing, refer to Siemens
standard cycles
First drilling depth is opposite to
total drilling depth
Value of groove depth equal to 0
The starting point lies outside the
area to be machined.
Infeed value = 0
Machine data for external
language MD18800
$MN_MM_EX-TERN_
LANGUAGE or options bit 19800
$MN_EXTERN_LAN-GUAGE is
not set.
E
187