Plain Texts For Machine And Setting Data - Siemens SINUMERIK 840D sl Commissioning Manual

7.11

Plain texts for machine and setting data

Application-specific and language-dependent plain texts can be configured for machine and
setting data depending on the version [Index].
Displaying the plain texts
You set the display of the plain texts using the following display machine data:
MD9900 $MM_MD_TEXT_SWITCH
= 1
= 0
Files
File
nctea_xxx.txt
chtea_xxx.txt
axtea_xxx.txt
hmitea_xxx.txt
For "xxx" the specified language code must be used, e.g. "deu" for German, "eng" for
English, etc.
Supported languages (Page 584)
Ensure that the file names are written in lower case letters.
Procedure
1. Depending on the machine or setting data for which you wish to change the plain text,
2. Save the file with the UTF-8 coding in order that umlauts and special characters are
3. Place the file in SINUMERIK Operate in the following directory:
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Plain text is displayed in the table
Plain text is displayed in the dialog line
create the corresponding file, e.g. "nctea_xxx.txt".
correctly displayed in SINUMERIK Operate.
System CF card/user/sinumerik/hmi/Ing or
System CF card/oem/sinumerik/hmi/Ing or
System CF card/addon/sinumerik/hmi/Ing
Note
The files are searched through in the sequence of the directories "user", "oem" and
"addon". The first file that is found is evaluated. If, e.g. text files are available in the "user"
and "oem" directories, the files are evaluated in the "user" directory.
7.11 Plain texts for machine and setting data
Plain texts instead of MD identifier
Machine/setting data
General machine/setting data
Channel-specific machine/setting data
Axis-specific machine/setting data
Display machine data
Machine and setting data
89