Searching For Machine And Setting Data - Siemens SINUMERIK 840D sl Commissioning Manual

Machine and setting data

5.7 Searching for machine and setting data

5.7 Searching for machine and setting data
You can search for specific machine and setting data.
Search strategies
● When a digit or a digit with an index is entered, an exact search for this parameter is
● When text is entered, a full-text search is performed: i.e., the term is searched for in both
Proceed as follows
...
48
performed.
Example If "9" is entered > p9 will be found (but not p99)
the relevant table and the status bar.
1. Select the "Startup" operating area.
2. Press the "Mach.data" softkey.
3. Press the "General MD", "Channel MD", "Axis MD", or "Control unit
MD" softkey.
- OR
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
HMI sl (IM9)