Configuration of the system
4.15 Configuring the SITOP UPS module for use with the PCU Base Software
4.15.3
Configuring SITOP software for PCU Base Software
4.15.3.1
Configuring SITOP software V3.x (USB)
Configuring SITOP software V3.x (USB)
If you want to use a SITOP UPS module in combination with the PCU base software, you must
first adapt the settings of the SITOP software.
Requirement
● The SITOP UPS hardware is connected via the USB interface.
● The SITOP software of version 3.x.2.16 or later is installed in directory C:\Program
Files (x86)\SITOP\
54
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
PCU Base Software (IM10)