10.2
Analog spindle
Machine axis index for analog spindle
For a spindle which is not assigned to any drive (FD, MSD, SLM), the power display can be
controlled via the PLC.
In order that the operating software identifies the spindle as analog spindle, enter the axis
index of the analog spindle in the following machine data:
MD51068 $MNS_SPIND_DRIVELOAD_FROM_PLC1
MD51069 $MNS_SPIND_DRIVELOAD_FROM_PLC2
10.3
Leadscrew error compensation
Instead of transferring the compensation data via the part program or INI file to the NC, you
can enter and check the compensation data for all axes or change the configuration in an
input screen.
Finally, the changed data is activated in the NC in one step. The machine data required
when activating is set automatically.
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Machine axis index of a spindle (analog) that draws the data for the utilization display in
the T,F,S window from the PLC (DB19.DBB6).
Machine axis index of a spindle (analog) that draws the data for the utilization display in
the T,F,S window from the PLC (DB19.DBB7).
1.
Select the "Start-up" operating area and press the "NC" softkey.
2.
Press the "Leadscrew error" softkey.
The "Values of the Compensation Tables" window opens and displays
the default compensation tables for an axis or, if no compensation
values are available, the measuring system used.
10.2 Analog spindle
Machine axis index spindle 1
Utilization display from the PLC
Machine axis index spindle 2
Utilization display from the PLC
Spindle functions
121