Configuring variables
6.3 Configuring GUD tags
6.3.2.2
Linearization based on the sorting in SINUMERIK Operate
Independent of whether an array is two or three dimensional, you can linearize the sorting in
SINUMERIK Operate.
Open a GUD array in SINUMERIK Operate under "Parameter > User tags > Global GUD >
GUD selection".
● The uppermost element [0,0] is addressed with index=0.
● The uppermost element [0,1] is addressed with index=1.
● etc. until the lowest or last element, which is addressed with MaxIndex.
Figure 6-3
78
Screen "Global GUD > GUD selection" in SINUMERIK Operate: The selected tag is
addressed using index=0, the tag below, using index=1 etc.
SINUMERIK Integrate Create MyHMI / WinCC V13 SP1
Configuration Manual, 11/2014