Archive Results - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
4 NC data management

4.5.2 Archive results

The results files are in English and contain the following results:

Group and machine name (below each other)

Date (at start and end)

An area entitled "NC data in machine only" in which files are listed that were
only found on the machine.

An area entitled "Different NC data" in which files on the machine are listed that
differ from those in the DNC system.

An area entitled "NC data in DNC system only" in which files are listed that
were only found in the DNC system and not on the machine.
Note
The area NC data in DNC system only is only created with the start parameter
for the SHOW_FILESONDNC auto archive. The NC data located in this section
and in the upload directory is assigned the auto archive identifier "2" in the DNC
system.
The final result is shown at the end. This indicates whether errors occurred during
the archive run and how many files were archived.
Note
If no errors occurred and this machine has been configured for archiving, all of
the differences will have been dealt with.
FBDN1/4-94
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07