Measuring Drilling And Milling Tools With The Workpiece Reference Point; Measuring Drilling And Milling Tools With Fixed Reference Point - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Measuring drilling and milling tools with the workpiece reference point

Tool measurement is only possible with an active tool.

Operating Manual, 05/2017, A5E40868956

Insert the tool you want to measure in the spindle.

Select "JOG" mode in the "Machine" operating area.

Press the "Meas. tool" and "Length manual" softkeys.

The "Length Manual" window opens.

Select the cutting edge number D and the number of the replacement tool

ST of the tool.

Select the "Workpiece" reference point.

Approach the workpiece in the Z direction, scratch it with a turning spindle

and enter the set position Z0 of the workpiece edge.

Press the "Set length" softkey.

The tool length is calculated automatically and entered in the tool list.

Insert the tool you want to measure in the spindle.

Select "JOG" mode in the "Machine" operating area.

Setting up the machine

4.5 Measure tool

Sinumerik 840de sl Sinumerik 828d