3 Setting up functions
3.4 Fault services
3.4.2 Control monitors - Detailed view
Function description
The detailed view of a control monitor is accessed by selecting an existing control
monitor or creating a new one.
Fig. 3-23: Control monitor overview
Control monitors are divided into three modules:
1. Trigger and conditions module
2. Action module
3. Workflow module
The general part deals with the function settings for a control monitor.
•
To start actions and/or workflows with the triggers, logic is configured and
information queries from NC PLC, database, or other intelligent components,
that can be addressed via the OPC and other protocols, are linked.
•
Workflows are notifications via e-mail or SMS and maintenance schedules.
•
Diagnostic actions involve data acquired from the control (NCK, PLC; PC or
another intelligent components, which can be addressed via OPC and other
protocols).
3-118
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
03/2013