Establishing The Connection; Establishing A Direct Connection (Peer-To-Peer Ethernet) - Siemens SINUMERIK 840D sl Operating Manual

5.3

Establishing the connection

5.3.1

Establishing a direct connection (peer-to-peer Ethernet)

Operating sequence
1. There are two ways of establishing a "direct connection":
– Select "Connection" > "Connect..." in the main window menu.
– Press the "Connect" button
2. Press the "Connect" button.
3. If the authentication data for the direct connection has already been saved, a connection
to the control is set up immediately.
If not, a dialog for entering the authentication data opens.
See also
Establishing a connection to the control system: An overview (Page 21)
Industrial Security Configuration Manual
108862708)
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Select the direct connection from a selection dialog.
Figure 5-5 Direct connections
in the toolbar to set up a connection.
(https://support.industry.siemens.com/cs/us/en/view/
Connection to the control
5.3 Establishing the connection
31