Configuring I/O; Inserting Adi4 Module (840 Sl) - Siemens SINUMERIK 840D sl Configuration Manual

Configuring I/O

7.1

Inserting ADI4 module (840 sl)

Procedure
In order to insert an ADI4 module into the project via the hardware catalog, proceed as
follows:
1. In the hardware catalog, navigate to the folder "Distributed I/O > Drive Interfaces > ADI4"
and select the ADI4 module.
2. Use drag-and-drop to move the ADI4 module from the hardware catalog and place it in the
network view.
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA
7
147